What do you guys think would be the best combo to get a really good pink in bright sunlight? Some of my thoughts were a really like pink led with red day blade? Or maybe even a purple day blade? Any ideas are highly appreciated!
↧
Day blade pink? - by: dangerousdva
↧
Saber Parts is Working... - by: wamphyri13
but no new parts yet. Oh well, at least we have something to play with again.
↧
↧
Which lightsaber should I get? - by: rpeters3
Hello everyone!
I was curious which lightsaber I should get between the two:
I feel like the first one will look more like Obi-wan’s but will be less comfortable and hard to grip because of the redeemer body.
The second one may look less like Obi-wan’s but will be more comfortable.
I would love to hear people’s opinions!![:)]( ":)")
I was curious which lightsaber I should get between the two:
I feel like the first one will look more like Obi-wan’s but will be less comfortable and hard to grip because of the redeemer body.
The second one may look less like Obi-wan’s but will be more comfortable.
I would love to hear people’s opinions!
↧
No response from Saberforge customer service - by: Cephas205
Hi all
Help needed, I sent 2 saberforge sabers for repair due to the kill key having problems. I paid USD300 as I wanted to upgrade to the Hero Tier. After close to a 5-6 months wait. I got my sabers back. I of the saber worked fine, but other one came back with major issues that I cant event boot up the saber.
Obviously, I was very disappointed.
I wrote to Saberforge to tell them the issue, waited for 3 days no response. I wrote in again, 3 days pass again no response. Now is day 8, still there is no response.
What is happening with saberforge? Do they care about their customer service?
I have been a repeat client many times and I am very reasonable and patient client. But within 8 days I have gotten 2 saberforge marketing emails but no response on my issues.
Any advice what I can do?
Peter
Help needed, I sent 2 saberforge sabers for repair due to the kill key having problems. I paid USD300 as I wanted to upgrade to the Hero Tier. After close to a 5-6 months wait. I got my sabers back. I of the saber worked fine, but other one came back with major issues that I cant event boot up the saber.
Obviously, I was very disappointed.
I wrote to Saberforge to tell them the issue, waited for 3 days no response. I wrote in again, 3 days pass again no response. Now is day 8, still there is no response.
What is happening with saberforge? Do they care about their customer service?
I have been a repeat client many times and I am very reasonable and patient client. But within 8 days I have gotten 2 saberforge marketing emails but no response on my issues.
Any advice what I can do?
Peter
↧
Button on Hilt Flashing while charging - by: JTV31
Hey, so i got a cheap charger for my champion saber. I am using one a friend gave me and when i plug it in, the saber button on the hilt starts flashing and doesn't stop. Any reason being for this? and how do I turn it off? i have a built in charger so i don't have to take the battery out.
↧
↧
Isolating Soundfonts from SWTOR - by: Eddlyss64
This may end up being a throwaway topic, and if it is, then Brax can feel free to get rid of it. I'm sure someone has already thought about doing this, but would it be possible to isolate the specific soundfonts of your lightsaber(s) from your SWTOR files and use them in an actual lightsaber? Like by pulling the files out somehow, or copying them from your computer?
I doubt it, since I would assume the files to be saved directly onto the server of your choosing in-game, but I figured that I ought to ask.
I doubt it, since I would assume the files to be saved directly onto the server of your choosing in-game, but I figured that I ought to ask.
↧
Plug and Play LED - by: Winmi
I am buying my first saber and I have a stupid question that needs a stupid answer.
I am looking to buy a legacy saber and cannot afford the top dollar Hero platform. As I read all the lower tiers I can meet, I am struggling to find if I can buy a plug and play LED and switch them as I please.
Thanks for kind replies.
I am looking to buy a legacy saber and cannot afford the top dollar Hero platform. As I read all the lower tiers I can meet, I am struggling to find if I can buy a plug and play LED and switch them as I please.
Thanks for kind replies.
↧
FS-ASP Redeemer Slight weathering. $350 USD - by: Vechaljian
For sale 350 USD PayPal shipped. (International subject to extra fee's)
1x ASP Redeemer with weathered grenade section, Spark 2(in chassis)- C1- blue/blue C2-white/white, 28mm bass speaker, 18650 battery, I made a change to the switch cover, it uses a magnet to hold it on the switch, to access kill key/RCP simply slide forward, also its a metal printed cover. To access the SD card remove pommel, very carefully and slowly UN-screw the first section of the Body(see picture). This is a AS-IS sale, It does work, charge etc. Sale includes the Hilt, the Kill Key, and the homemade blade plug, the blade, charger and allen keys are up to you.
![]()
![]()
![]()
![]()
1x ASP Redeemer with weathered grenade section, Spark 2(in chassis)- C1- blue/blue C2-white/white, 28mm bass speaker, 18650 battery, I made a change to the switch cover, it uses a magnet to hold it on the switch, to access kill key/RCP simply slide forward, also its a metal printed cover. To access the SD card remove pommel, very carefully and slowly UN-screw the first section of the Body(see picture). This is a AS-IS sale, It does work, charge etc. Sale includes the Hilt, the Kill Key, and the homemade blade plug, the blade, charger and allen keys are up to you.
↧
ASP gluded threads - by: Danielbs80
Does anyone know how to get the emitter and body off?
↧
↧
Problem with order - by: TritanisObscuro
So I ordered on January 15 and according to the "lead" time of 4 to 8 weeks, they should've been done 2 weeks ago. I emailed them last week about a question and maybe an update but have not gotten a response. I am having to move in about three weeks and I would like to have the sabers by then or else idk what I will do.
↧
Petition to bring back the silver knight - by: GreyJedi66
i saw a review of this saber last weekend and when i went n the website to see if it was there, i was really dissapointed to be informed that it had been discontinued. Therefore, im creating a petition to bring it back. So who's signing?
↧
NBv4 build - by: Danielbs80
So a little while ago I got an empty ASP Hilt from saberforge that I installed my own Electronics in and it's been working great but just last night I will turn it on and I would have it start up sound and it would play The Hum and the light would come on and be flickering and it would seem good but then just seconds later the light would turn off and the sound would turn off but yet the LED switch would remain on which is normal for it to be on anyway so I'm wondering what's going on I checked all the wiring and everything and everything is fine and then I checked the battery and so I pulled it out and I stuck it into one of my smart Chargers that has little light indications that will light up every time it reaches a certain level of charge and the 18 650 seems to be taking a really long time to charge and is blinking barely on the second light so could be that the battery was too low on voltage? I am wondering if the LED switch light was on just because it doesn't require as much voltage. It's odd because I have been using this charger I have that I normally charge my drones with that you can set how you want it to charge so I have it set to charge a lilo battery for 3.6 at .5amp and I was running that all night and supposedly it went for like 2 hours and then it said finished but I was still having that problem and when I took it out and put it in my big charger that is dedicated for that kind of battery it's acting like it doesn't have much charge in it at all
↧
Saber Forge Repair - by: Discoetheque
Just wanted to stop in and give proper due to the repair staff at Saberforge. I got my Disciple Shoto a while back, and it worked literally just long enough for me to open it up, play with it for a little bit and take a few photos before it went down that same evening with a defective soundboard. The customer service staff did what they could over email for a few days to attempt to troubleshoot the issue before we decided it was hardware-related and warranted being sent back.
So mid Feb, I sent my precious amber beauty back and awaited her return.
She was fixed in just a little under four weeks. A new soundboard was installed, and she came back to me all shiny and as perfect as the day she arrived (I know this because there was a little scrape next to the bolt that holds the blade plug in place where my hex key slipped, and now it's gone). They very well may have replaced the entire top portion of the saber, because I had sanded it down that same evening I got it and when it was returned to me, the points were sharp again.
Not only was my saber repaired and cleaned up and returned to me with documentation of what was done, but I was also given a new Covertech wheel set, new belt clip and a darn nice T-shirt. Which they really didn't have to do, but was amazing.
So thank you so much, Saber Forge customer service and repair!
So mid Feb, I sent my precious amber beauty back and awaited her return.
She was fixed in just a little under four weeks. A new soundboard was installed, and she came back to me all shiny and as perfect as the day she arrived (I know this because there was a little scrape next to the bolt that holds the blade plug in place where my hex key slipped, and now it's gone). They very well may have replaced the entire top portion of the saber, because I had sanded it down that same evening I got it and when it was returned to me, the points were sharp again.
Not only was my saber repaired and cleaned up and returned to me with documentation of what was done, but I was also given a new Covertech wheel set, new belt clip and a darn nice T-shirt. Which they really didn't have to do, but was amazing.
So thank you so much, Saber Forge customer service and repair!
↧
↧
Mixing Colors With Day Blades - by: Snajeelay
So I'm going to start off by saying this is going to involve a rarer saber color, pink...
Ive seen before when using a red dayblade, at night pink is slightly brighter, maybe deeper into fuscia. Durring the day it looks red with a muddy bluish magenta in it.
Has anyone that may own a saber of that color ever try popping a blue or purple dayblade into one?
I am just curious as I ponder buying a day blade or a LC for a second, but dont see many if any examples of 'color mixing".
If anyone has or does, some pix and first hand experience would be cool.
Ive seen before when using a red dayblade, at night pink is slightly brighter, maybe deeper into fuscia. Durring the day it looks red with a muddy bluish magenta in it.
Has anyone that may own a saber of that color ever try popping a blue or purple dayblade into one?
I am just curious as I ponder buying a day blade or a LC for a second, but dont see many if any examples of 'color mixing".
If anyone has or does, some pix and first hand experience would be cool.
↧
Saberforge blades are super durable! Video review - by: alongwargame
These blades dont give in! Props to Saberforge.
↧
Veteran soundboard comparability - by: Excronix
So I just ordered the Veterans 2.5 USA Plug and Play soundboard. With it I got a charger and momentary switch. Is this all I need? I know it comes with a recharge port but from what the pictures of the soundboard show it doesn’t look like the connectors match up to the momentary switch. Do I need another kind of switch instead? Help!!!
↧
Momentary Switches - by: Excronix
On the website all the switches for plug and play seem to have the same connectors, but on the soundboards they are different. Do i have to specify what my switch is for? I ordered a soundboard (verteran) and a momentary switch but didn’t specify. Am I okay? Or should I email them?
↧
↧
Saberforge blades are super durable! Video review - by: alongwargame
These blades dont give in! Props to Saberforge.
↧
Momentary Switches - by: Excronix
On the website all the switches for plug and play seem to have the same connectors, but on the soundboards they are different. Do i have to specify what my switch is for? I ordered a soundboard (verteran) and a momentary switch but didn’t specify. Am I okay? Or should I email them?
↧
Phoenix Build Log - by: Vechaljian
Started working on this today, I decided I wanted a working red button, so I had to do some channel cutting for wires. and a few mods to the Graflex red Button thumb screw.
![]()
![]()
↧